admin 
A strong, durable standalone self-powered system, the installation of the solar maintenance-free battery requires careful handling during placement in the control box to prevent damage. The connection wires between the batteries should be bolted to the battery terminals using copper washers to enhance conductivity. The output wires are to be connected to the batteries, and under no circumstances should there be any short circuits to avoid damage to the batteries. The output wires from the batteries must connect to the controller inside the pole through PVC conduit. After completing these steps, check the wiring at the controller end to prevent short circuits, and close the control box door once checked.
Installation of the solar courtyard light requires that all components be securely fixed: The solar panel should be mounted on the solar panel bracket, the lamp head secured to the arm, and then the bracket and arm should be fixed to the main pole, with the connection wires routed to the control box (battery box). Before lifting the lamp pole, ensure all fasteners are secure, the lamp head is installed correctly, and the light source is functioning properly.
Next, test whether the solar courtyard light system is operating as expected. Disconnect the solar panel connection wire on the controller; the light source should work normally, while reconnecting the solar panel wire should turn off the light. Observe the changes in the indicator lights on the controller closely; only when data is normal can the installation proceed.
When lifting the main lamp pole, ensure safety precautions are in place. Tighten all screws properly. If the components are not oriented towards the sun correctly, adjustments should be made to ensure they face directly south.
Insert the battery into the battery box, and connect the wires to the controller per technical requirements: connect the battery first, then the load, followed by the solar panel. Make sure not to mix up any connections with terminals labeled on the controller and avoid reversing the positive and negative poles to prevent controller damage.
Re-test the solar courtyard light system for normal operation. Disconnect the solar panel connection wire on the controller; the light source should illuminate, and reconnecting the solar panel wire should turn off the light. Observe the changes in the indicator lights on the controller closely; only when data is normal can the control box be properly sealed.
Bitpott solar courtyard lights are produced by professionals specializing in the research, development, manufacturing, and sales of outdoor lighting, including solar and LED products. With years of manufacturing experience and advanced equipment, they offer guaranteed quality, reasonable prices, and configurations. For inquiries about Bitpott solar courtyard light pricing, please reach out to our online customer service or contact us directly. We welcome your call to place an order!
