Before the installation of solar street lights, attention must be paid to the disassembly and assembly location selection, and working on rainy days should be avoided. Count the lights according to the delivery list, disassemble, and check each component against the packing list to ensure there are no dents, wear, deformation, or scratches.
When placing lamp pole components and easily worn parts (such as solar panels and lamp heads), use soft padding to prevent scratching and other unnecessary damage during the installation process. The upper end of the lamp pole component should be supported by an iron frame to facilitate installation. It is also necessary to check the positive and negative terminal markings on the solar panel to ensure correct connections. A multimeter can be used to verify this to prevent issues with incorrectly marked terminals. Verification method: Use the red and black probes of a digital multimeter to touch the two terminals of the panel; if a positive value is shown, the red probe corresponds to the positive terminal, and if a negative value is shown, it corresponds to the negative terminal. Other methods for testing positive and negative terminals are similar.
The installation of solar street lights by manufacturers is also a discipline. The following points should be adhered to when installing solar street lights:
1. The solar panel should face true south.
2. The installation of arrays should be done in locations without tall buildings, trees, or power poles that obstruct sunlight and shield from wind. If it is impossible to ensure all-day unobstructed sunlight, it should be guaranteed that at least from 9:30 to 15:30, there is no obstruction.
3. Solar street lights should be avoided near heat sources to prevent affecting the lifespan of the lights.
4. There should not be direct light sources above the solar panel to avoid misidentification and incorrect operation of the solar street light’s control system.
5. The foundation construction for the lamp pole must have sufficient strength, and embedded components should be reliable and compatible with the lamp base.
6. The design of grounding and lightning protection facilities should strictly follow design specifications, ensuring that all solar street lamp poles and electrical equipment have reliable grounding and lightning protection. After the excavation of the foundation pit, low poles under 12m should have galvanized angle steel measuring 50mm x 5mm x 1500mm driven into the corners of the pit, with a grounding resistance of less than 10Ω. If geological conditions make this difficult, solutions such as burying grounding bodies or using resistance-reducing agents can be employed.
To learn more about the price list for solar street lights, please inquire with the street light manufacturers. Bitpott solar street light manufacturers specialize in the research, development, production, and sale of solar and LED outdoor lighting. With years of production experience and advanced manufacturing equipment, they guarantee quality, reasonable prices, and configurations. For purchasing LED solar street lights or inquiring about LED solar street light prices, you are welcome to contact us.
We look forward to your inquiries!
