admin 
Today, towering high poles can be seen on roads, streets, and parks. The basic components of high poles consist of the lamp head, pole body, and internal lighting parts. The pole is the main shaft, and the materials for the lighting parts can vary depending on environmental needs, such as stainless steel, steel, or aluminum. There are various internal lighting components, mainly floodlights and spotlights. High poles are installed in many places, and some people may not know the correct and reasonable way to install them. Below, I will discuss the correct installation procedure for high poles.
The winch and motor both have manual and electric control functions. Slowing down can make the winch and motor operate flexibly, and speed should not be too fast during lifting. Users may choose different high poles for different occasions, which means the installation steps can vary as well. In fact, installing high poles is not a very difficult task; we just need to understand the installation process clearly. High poles can be installed at different heights, and the setup may vary. When installing high poles, it is important to remember a few key points:
1. Preparation before installing the high poles:
Before loading and boxing the high poles, carefully check whether all tools are complete and examine each component for damage, bending, or fracture. If any damage is found, parts should be replaced promptly.
During the installation of high poles, each section of the pole will be marked with the type of pole, order number, and the number of segments. Each joint will provide detailed specifications regarding the length and size of the pole connections to prevent errors or misfits during installation. To facilitate quick and easy installation, lubrication may be needed. However, lubrication oil cannot be used as it may leak and contaminate the pole; soapy water should be used to connect the inner and outer pole surfaces. Appropriate force should be applied at both ends during the connection to ensure a tight fit.
2. Inspection after installing the high poles:
After installing the high poles, a thorough inspection is necessary. Check whether the switch effectively controls the power supply and confirm if it operates normally. After securing the screws, carefully check to ensure they are tight and not loose, avoiding unnecessary issues.
This summarizes the correct steps for installing high poles shared with everyone. The provided installation steps are straightforward, and I believe everyone can understand them. Correctly installing high poles can prolong their lifespan, and gaining more knowledge about streetlights can help minimize damage.
