Solar Street Light Manufacturers: What Debugging Methods Should be Focused on Before Installation?

Manufacturer of Solar Street Lights

During the installation process, most people are primarily concerned with the adjustment methods for solar street lights. So what preparations should be made before installation?

Control Function

During the actual installation process by the

manufacturer of solar street lights

, it is advisable to set the daily lighting time according to the existing design requirements. Generally, the controlled instructions provided in the manual may vary to some extent. The lighting time each night should not exceed the value originally set, and it should be equal to or less than that value; otherwise, it may affect the overall lifespan of the lighting.

Light Control Function Simulation

In the process of controlling the actual solar street light by the

manufacturer of solar street lights

, if the wiring is done during the day, an opaque material can be used to cover the entire solar panel. This approach allows the light surface to exhibit a unique characteristic. Based on the extended time mentioned in the controller’s instructions, it is essential to observe whether the light source of the solar street light can automatically illuminate after the specified time. If the light source can generate power automatically, it indicates that the light control switch is functioning correctly. If not, it may imply that the light control switch is malfunctioning. Therefore, it is important to understand whether the light source can automatically extinguish, which confirms that the entire light control function is operating normally.

From the above introduction, it is believed that most people should pay significant attention to properly adjusting the solar street lights before use.