Electrical safety has always been emphasized by people, especially when using solar garden lights. It is crucial to implement adequate measures for preventing electric shocks. The positive and negative electrodes must be clearly identified, and thermal conductive silicone grease should be applied to the surface of the lamp. The amount of silicone grease should be moderate, usually around 0.03 grams, and the coating must be uniform, without shortcuts. When applying the silicone grease, care must be taken to avoid contaminating surrounding items, including oneself. The lamp boards should be secured, and the silicone grease-coated boards should be placed at the bottom of the lamp housing one by one, ensuring that the screw holes of each board are fixed. It is vital to maintain consistent orientation during the installation of lamp boards, ensuring a neat alignment to prevent any unevenness.
During the installation of solar garden lights, it’s important to ensure that the screws are tightened. The welded wires have the red wire connected to the positive electrode and the black wire to the negative electrode. If reversed, the light will not function properly. The solder points must be bright and full, without burrs. Avoid touching the surface of the reflector with your hands; it must be smooth and free from gaps. The waterproof grooves on both sides of the lamp housing should leave approximately 1CM each, secured using tweezers and waterproof tape. These issues are primarily minor details that should be carefully monitored during installation to ensure a smooth process.
Bitpott Solar Garden Lights manufacturers specialize in the research, production, and sales of solar and LED outdoor lighting. With years of production experience and advanced manufacturing equipment, we ensure quality, reasonable pricing, and configuration. If you are interested in purchasing solar garden lights or consulting for solar garden light prices, please contact our online customer service.
Thank you for considering our products!
