In order to improve the utilization of LED courtyard lights in road lighting, the light intensity center of the luminaire should tilt at a certain angle towards the road direction. Ideally, the light intensity center should fall on the center line of the road. Considering that the luminaires have an approximate elevation angle of 10°, we can calculate that the light intensity center should deviate towards the road direction by 15° to 20°. The lens is mounted on the LED bracket, which is secured with high-power LED chips. The surface of the lens may have an anti-reflective coating, and the cavity between the lens and chip is filled with high-temperature silicone to reduce multiple reflections of light within the cavity, allowing it to refract directly through the lens.
This year’s demand for outdoor street lighting is very large, threatening to replace traditional courtyard lights. However, many people have noticed that LED courtyard lights come with a series of technical issues that need to be understood. Today we will explain how to make LED courtyard lights brighter. It is known that LED brightness is adjusted based on the controlled light emission angle. In other words, the emission angle is a factor that determines LED brightness. Generally, courtyard lights for residential areas or roads are typically set at either 3.5 meters or 4 meters. Based on geometric relationships, the emission angle is generally calculated to be 140 degrees.
To improve the utilization of street lights in road lighting, the light intensity center of the luminaires should tilt at a certain angle towards the road direction. Ideally, the light intensity center should fall on the center line of the road. Considering that street light fixtures have approximately a 10° elevation angle, we can calculate that the light intensity center should deviate towards the road direction by 15° to 20°. The lens is mounted on the LED bracket, which is secured with high-power LED chips. The surface of the lens may have an anti-reflective coating, and the cavity between the lens and chip is filled with high-temperature silicone to reduce multiple reflections of light within the cavity, allowing it to refract directly through the lens.
Bitpott LED courtyard light manufacturer specializes in the R&D, production, and sales of solar and LED outdoor lighting. With years of production experience and advanced production equipment, they guarantee quality, reasonable prices, and configurations. For solar courtyard lights, to inquire about LED courtyard light prices, please contact us through our online customer service or a dedicated hotline. Welcome to place your orders!
