admin 
Road lighting street lamps
are the most commonly seen type of street lamp in the current social environment. There are specific installation requirements for these lamps, so how should they be installed based on the existing conditions?
(1) The installation of
road lighting street lamps
should be carried out effectively according to the current design requirements. All material specifications must be processed within a short period of time, with a cutting length of no less than 2.5 meters. This is to avoid uneven stress that could lead to the misalignment of the entire pipe. It is also possible for a flat tip to be formed during the processing. In cases where the soil is particularly hard, these sharp ends can be shaped into a preliminary form. If selecting angle steel, it should have an area greater than 40 millimeters, and the cutting length should also not be less than 2.5 meters. One end of the angle steel should be processed to a pointed shape.
(2) According to the requirements outlined in the drawings, the grounding device’s wiring should be thoroughly measured, and the excavation depth should be sufficient. For the angle steel, which should be between 0.8 meters and 1 meter deep, any stones at the bottom of the trench should be completely removed.
(3) Once the excavation is complete, installation should take place immediately. Grounding flat steel should be embedded to prevent soil collapse, placing the grounding in the center of the trench. Generally, a hand hammer can be used to drive it in, with one person striking while another holds it, facilitating entry to the top. To avoid splitting the foot tube or steel pipe, a protective cap can be added.
(4) During the installation of
road lighting street lamps
, the grounding flat steel should be placed in the trench before burial. Welding will ensure a proper connection, followed by surface cleaning and applying anti-corrosive paint for treatment.
