admin 
During transportation,
led solar street lights
are often disassembled into parts for shipping. Because their structure is relatively complex, correctly and quickly installing
led solar street lights
can be a challenge for inexperienced individuals. Below, we will share some preparation tips for installing solar street lights.
1. Prepare tools when assembling the led solar street lights.
The main tools required are: multimeter, hex wrench, cross screwdriver, needle-nose pliers, and insulating tape. Once you have prepared the necessary tools, choose a safe environment close to the installation site for the assembly.
However, during assembly, you should understand the specific sequence of assembly. Different assembly orders will naturally yield different results.
2. Use washers during installation.
When installing solar street lights, washers should also be used to prevent wear, which can extend the life of the lights.
3. When unpacking, count the relevant components according to the inventory list.
If any parts are missing, you should promptly consult the manufacturer. Additionally, you should check the condition of the components, as damage can occur during transportation. If you find any damaged parts, they should be replaced.
Bitpott Solar Street Light Manufacturer
specializes in the research, development, production, and sales of solar, led, and other outdoor lighting fixtures, boasting years of production experience and advanced equipment, ensuring quality with reasonable prices and configurations. For inquiries about the
led solar street light prices
, please contact our
online customer service
, or call our street light service hotline:
400-0760-905
. We welcome your orders!
