How to Use Solar Street Lights:
1. Determine the appropriate installation method (top or side) based on the actual lighting needs of the installation site and adjust the mounting bracket. Then, create a three-core cable of the necessary length based on the distance between the lamp and the power connection point.
2. Open the main buckle in front of the lamp by hand, lift the top cover of the lamp, and guide the cable into the lamp cavity through the cable at the back of the lamp. Connect the cable according to the polarity indicated on the lamp’s terminal block (live wire to “L”, neutral wire to “N”, and ground wire to the ground terminal).
3. Insert the lamp pole into the entrance hole of the mounting bracket and select the appropriate gear position for the lamp pole. Position the lamp pole in the support tube according to the required lighting angle, tighten the compression bolts on the lamp pole, and securely connect the lamp pole to the lamp.
4. When replacing the bulb, unscrew the lamp holder, pull out the lamp holder, remove the old bulb, replace it with a new bulb, and insert it into the lamp cavity at the appropriate gear (the 400W bulb uses the outermost gear position, the 250W fixture uses the innermost gear position, and the middle position is for adjustment) and secure it.
5. Close the top cover of the lamp and lock the buckle. The three-core cable can be connected to the municipal power supply to enable lighting.
When using the lamp for the first time, solar street light manufacturers must install and adjust the position and height of the fixtures according to the actual lighting needs of the site. When in use, it is important to pay attention to the relevant usage methods to better meet the usage requirements and satisfy people’s needs, ensuring normal operation.
