admin 
Everyone might see solar street lights on the streets. When we look for these solar street lights, the most important aspect is the design standards of the entire solar street light. Currently, the existing design standards for solar street lights provide us with enhanced experiences. Therefore, when most people choose these solar street lights, they may want to understand the design standards of the entire solar street light. Let’s take a closer look.
1. In the actual design process of existing solar street lights, the illumination design of the entire system is quite unique. The average illumination level of the sidewalk is generally above five, and the illumination standards at road intersections can basically meet the current specification requirements.
2. During actual usage, the primary requirement for pedestrian paths is that the solar street light fixtures must comply with the existing cutoff type lamp technical requirements. Additionally, specific conditions at intersections or bends should be understood based on the actual situation.
3. The arrangement of the entire solar street light fixtures is predominantly single-sided. The installation height of the fixtures is about three meters, and the general spacing between fixtures is around 50 meters. The projection length ranges from 0.5 to 1 meter, with an inclined angle of approximately 15 degrees.
4. There are other requirements during actual use of solar street lights, such as the need for lightning protection grounding. The design process should consider where they will be installed, and different designs may be required for different locations. The electrical resistance used in the entire project may also vary.
