admin 
Installation method for lithium battery solar street lights:
1. Burial installation. For a 6-meter street light as an example, the dimensions are 60*60 cm, and the depth is 70 cm. Use adhesive strips to mark the position for the screws, then bury and consolidate.
2. Wiring.
3. Wiring method for lithium battery and LED lights.
4. Load output: Positive and negative terminals (red wire represents positive, black wire represents negative); connect the positive terminal to the positive of the LED light and the negative terminal to the negative of the LED light.
5. Connection method between lithium battery and solar panel; solar input: positive and negative terminals; connect the positive terminal to the positive of the solar panel and the negative terminal to the negative of the solar panel.
6. Once the connection is made, check if the charging indicator light (green light) is functioning properly; if it lights up normally, disconnect the solar input after 10 seconds. The LED light should function normally; reconnect the solar input, and after 10 seconds, the LED light should turn off.
The above installation method for lithium battery solar street lights has been shared here. Additionally, the wiring section on the back of the solar panel features a flip design which can be gently pried open with a screwdriver. The solar panel wiring corresponds to the positive and negative wire connections from the lithium control integrated battery, and wiring should be securely wrapped with electrical tape.
